收藏本站
FPS1000 Instruction Manual
CHAPTER 4 FUNCTIONS AND FEATURES
4.1 Input Voltage Range
Input voltage is single phase 85~265Vac (47~63Hz). The power supply can be operated also with a DC input voltage,
120~330VDC but the safety approvals apply to the AC voltage only. Input voltage which is out of the specifications
might cause damage to the unit.
4.2 Output voltage trimming
The output voltage can be adjusted within the specifications via the V_Trim pin at the In/Out connector.
Refer to Fig 4-1 typical connection and calculation of the adjustment resistors:
Note that the Over Voltage Protection may trigger if the output voltage exceeds the maximum voltage specification.
R2=0.0324*V out -1.1298*V out +9.9342
FPS1000
8
+S
+V
R1 K Ω
FPS1000-12:
2
R1(K Ω )=5(K Ω )-R2(K Ω )
R2=0.0785*V out -5.819*V out +105.132
14    V_trim
FPS1000-24:
2
R2=0.0463*V out -4.5805*V out +109.49
R2=0.0497*V out -7.2795*V out +259.04
Fig 4-1
4.3 Over Voltage Protection (OVP)
13 -S
-V
R2 K Ω
R1(K Ω )=20(K Ω )-R2(K Ω )
FPS1000-32:
2
R1(K Ω )=20(K Ω )-R2(K ΩΩ )
FPS1000-48:
2
R1(K Ω )=50(K Ω )-R2(K Ω )
The OVP triggers when the output voltage exceeds the maximum rating and reaches the OVP limit. When the OVP
is triggered, the output voltage shuts down. In order to resume operation, the AC input voltage should be removed
for more than 30 sec. The OVP level is factory set and is not adjustable.
4.4 Over Current Protection (OCP)
A constant current limiting with automatic recovery is provided. The OCP operates when the output current exceeds
105%~125% of the rated output current. The output voltage recovers automatically when the overload condition is removed.
Avoid operating the power supply under overload condition for long time as it might cause damage to the power
supply.
4.5 Over Temperature Protection (OTP)
The OTP is activated when the ambient temperature or the power supply internal temperature exceeds a safe temperature.
When the OTP is activated, the power supply output shuts down. The output recovers automatically when the ambient
temperature or the internal temperature cools to a safe limit.
4.6 Auxiliary 12V output
An isolated 11.2V~12.5V output is provided (Referenced to the Signals_Return potential). The maximum output
current from this output is 0.25A. This output has a built-in Oring diode to allow paralleling FPS1000 units. Use this
output for the control and monitoring signals described in this chapter or to operate application circuits.
4.7 Over Temperature Alarm
An open collector output provides an Over Temperature Alarm approx. 10 ° C below shut down by the OTP. The open
collector output is referenced to the Signals_Return potential and is isolated from the power supply +V and -V
terminals
The maximum sink current is 10mA and the maximum external voltage is 15V.
Refer to Fig 4-2 for typical application.
FPS1000
16
12V aux
10K Ω
12
Over temperature alarm
10
Signals return
Fig 4-2
11
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
FPXLF0368-20 CRYSTAL 3.6864 MHZ 20PF SMD
FQ3225B-27 CRYSTAL 27.000 MHZ 20PF SMT
FQ5032B-18.432 CRYSTAL 18.432 MHZ 20PF SMD
FQ7050B-7.3728 CRYSTAL 7.3728 MHZ 20PF SMD
FRJ2411 CONN MOD JACK DUST CAP GREY
FRL91-23CGA3-BB79 SWITCH ROCKER DPDT 20A 12V
FRN91-27BB SWITCH ROCKER DPDT 20A 12V
FSM100 SWITCH TACTILE SPST-NO 0.05A 12V
相关代理商/技术参数
FPS100032/P 功能描述:线性和开关式电源 1000W 32V 31A RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压（通道 1）:20 V 输出电流（通道 1）:40 A 商用/医用: 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:Rack 长度: 宽度: 高度:
FPS100032/S 制造商:TDK-Lambda Corporation 功能描述:Power Supply, 992 Watts 制造商:TDK-Lambda Corporation 功能描述:1008W,85-265VAC,32V@40A,1.61" X 5" X 11.4" - Bulk
FPS100048 功能描述:线性和开关式电源 1000W 48V 21A Rear AC Input RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压（通道 1）:20 V 输出电流（通道 1）:40 A 商用/医用: 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:Rack 长度: 宽度: 高度:
FPS1000-48 制造商:TDK 功能描述:
FPS100048/P 功能描述:线性和开关式电源 1000W 48V 21A RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压（通道 1）:20 V 输出电流（通道 1）:40 A 商用/医用: 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:Rack 长度: 宽度: 高度:
FPS100048/P-HFP 制造商:TDK-Lambda Corporation 功能描述:1008W,85-265VAC,48V@21A,1.61" X 5" X 11.4", HAZMAT - Bulk
FPS100048/PS 功能描述:线性和开关式电源 1000W 48V 21A RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压（通道 1）:20 V 输出电流（通道 1）:40 A 商用/医用: 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:Rack 长度: 宽度: 高度:
FPS100048/PS-HFP 制造商:TDK-Lambda Corporation 功能描述:1008W,85-265VAC,48V@21A,1.61" X 5" X 11.4", HAZMAT - Bulk